| Motherboard | Super X11DPH-T |
| CPU | Dual Socket P (LGA 3647) |
| Intel Xeon Scalable Processors, |
| 3 UPI up to 10.4GT/s |
| Support CPU TDP 70-205W |
| Cores | Up to 28 Cores with Intel HT Technology |
| Memory Capacity | 16 DIMM slots |
| Up to 2TB ECC 3DS LRDIMM, 512GB ECC RDIMM, DDR4 up to 2666MHz |
| Memory Type | 2666/2400/2133MHz ECC DDR4 SDRAM |
| Chipset | Intel C624 chipset |
| SAS | SAS3 (12Gbps) via Broadcom 3108 AOC; HW RAID |
| RAID 0, 1, 5, 6, 10, 50, 60 |
| SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 |
| Network Controllers | Dual 10GBase-T LAN ports with Intel X722 + PHY Intel X557 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 |
| IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| Video | ASPEED AST2500 BMC |
| LAN | 2 RJ45 10GBase-T LAN ports |
| 1 RJ45 Dedicated IPMI LAN port |
| USB | 4 USB 3.0 ports (rear) |
| 1 Type A |
| Video | 1 VGA port |
| Serial Port / Header | 1 Fast UART 16550 port / 1 Header |
| BIOS Type | 256Mb AMI UEFI |
| Software | Intel Node Manager |
| IPMI 2.0 |
| NMI |
| SPM, SUM |
| SuperDoctor 5 |
| Watchdog |
| CPU | Monitors for CPU Cores, Chipset Voltages, Memory. |
| 4+1 Phase-switching voltage regulator |
| FAN | Fans with tachometer monitoring |
| Status monitor for speed control |
| Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment |
| Thermal Control for fan connectors |
| Form Factor | 2U Rackmount |
| Chassis | CSE-826BE1C4-R1K23LPB |
| Width | 17.2" (437mm) |
| Height | 3.5" (89mm) |
| Depth | 24.8" (630mm) |
| Gross Weight | 61 lbs (27.7 kg) |
| Available Colors | Black |
| Buttons | Power On/Off button |
| System Reset button |
| LEDs | Power status LED |
| Hard drive activity LED |
| Network activity LEDs |
| System Overheat LED |
| Power fail LED |
| PCI-Express | 3 PCI-E 3.0 x16 slot |
| 4 PCI-E 3.0 x8 slots |
| Slot 2 & 3 occupied by controller and JBOD expansion port |
| Hot-swap | 12 Hot-swap 3.5" SAS3/SATA3 drive bays |
| Optional | 2 Optional Onboard NVMe M.2 |
| Fans | 3 Hot-swap 8cm redundant PWM cooling fans |
| Total Output Power | 1000W/1200W |
| Dimension | 76 x 40 x 336 mm |
| Input | 100-127Vac / 15-12A / 50-60Hz |
| 200-240Vac / 8.5-7A / 50-60Hz |
| +12V | Max: 83A / Min: 0A (100-127Vac) |
| Max: 100A / Min: 0A (200-240Vac) |
| +5Vsb | Max: 4A / Min: 0A |
| Output Type | 19 Pairs Gold Finger Connector |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: |
| 10°C ~ 35°C (50°F ~ 95°F) |
| Non-operating Temperature: |
| -40°C to 60°C (-40°F to 140°F) |
| Operating Relative Humidity: |
| 8% to 90% (non-condensing) |
| Non-operating Relative Humidity: |
| 5% to 95% (non-condensing) |
Под заказ
Информация об оплате
В корзину
