| Product SKUs |
| SSG-2028R-E1CR24N | SuperServer 2028R-E1CR24N (Black) |
| Motherboard | Super X10DRi-T4+ |
| Processor/Cache |
| CPU | Intel Xeon processor E5-2600v4/ v3 family (up to 145W TDP) * Dual Socket R3 (LGA 2011) |
| Cores / Cache | Up to22 Cores / Up to55MB Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | BIOS version 2.0 or above is required |
| System Memory |
| Memory Capacity | 24x 288-pin DDR4 DIMM slots Up to 3TB ECC 3DS LRDIMM, 1.5TB ECC RDIMM |
| Memory Type | 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | RDIMM: 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB 3DS LRDIMM: 128GB |
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors |
| On-Board Devices |
| Chipset | Intel C612 chipset |
| SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 |
| SAS3 AOC | LSI 3108 SAS3 AOC Hardware RAID 0, 1, 5, 6, 10, 50, 60 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC |
| Network Controllers | Intel X540 Quad Port 10GBase-T Virtual Machine Device Queues reduce I/O overhead Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Video | ASPEED AST2400 BMC |
| Input / Output |
| LAN | 4 RJ45 10GBase-T ports 1 RJ45 Dedicated IPMI LAN port |
| USB | 3 USB 3.0 ports (2 rear + 1 Type A) 2 USB 2.0 ports (2 rear) |
| Video | 1 VGA port |
| Serial Port / Header | 1 Fast UART 16550 port / 1 Header |
| Chassis |
| Form Factor | 2U Rackmount |
| Model | CSE-216BE1C-R920LPB |
| Dimensions |
| Width | 17.2" (437mm) |
| Height | 3.5" (89mm) |
| Depth | 24.8" (630mm) |
| Gross Weight | 61 lbs (27.7 kg) |
| Available Colors | Black |
| Front Panel |
| Buttons | Power On/Off button System Reset button |
| LEDs | Power status LED Hard drive activity LED 2 Network activity LEDs System Overheat LED Power fail LED |
| Expansion Slots |
| PCI-Express | 2 PCI-E 3.0 x16 slots 3 PCI-E 3.0 x8 slots 1 PCI-E 2.0 x4 (in x8) slot Slot 3 & 4 occupied by controller and JBOD Expansion Port |
| Drive Bays |
| Hot-swap | 24x 2.5" Hot-swap SAS3/SATA3 HDD bays |
| Backplane |
| SAS3 12Gbps single expander backplane, w/ 24x SAS3 2.5" drive slots and 4 mini-SAS HD connectors for SAS3 uplink/downlink |
| System Cooling |
| Fans | 3x 8cm 7K RPM, 4-pin PWM fans |
| Power Supply with Power Distributor |
| 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C |
| AC Input | 100-240 V, 50-60 Hz, 11-4.5 Amp |
| DC Output | 4 Amp @ +5V standby 75 Amp @ +12V |
| System BIOS |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP) APM 1.2 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 UEFI |
| Operating Environment / Compliance |
RoHS
| RoHS Compliant |
| Environmental Spec. | Operating Temperature:
10°C to 35°C (50°F to 95°F) Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) Operating Relative Humidity:
8% to 90% (non-condensing) Non-operating Relative Humidity:
5% to 95% (non-condensing) |
Информация об оплате
В корзину
