Product SKUs |
SYS-F628R3-RTB+ | SuperServer F628R3-RTB+ (Black) |
Motherboard | Super X10DRFR |
Processor/Cache |
CPU | Intel Xeon processor E5-2600v4/ v3 family (up to 145W TDP) * Dual Socket R3 (LGA 2011) |
Cores / Cache | Up to22 Cores / Up to55MB Cache |
System Bus | QPI up to 9.6 GT/s |
Note | BIOS version 2.0 or above is required |
System Memory |
Memory Capacity | 16x 288-pin DDR4 DIMM slots Up to 2TB ECC 3DS LRDIMM, 1TB ECC RDIMM |
Memory Type | 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes | RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB 3DS LRDIMM: 128GB |
Memory Voltage | 1.2 V |
Error Detection | Corrects single-bit errors |
On-Board Devices |
Chipset | Intel C612 chipset |
SATA | SATA 3.0 (6Gbps) w/ RAID 0, 1, 5, 10 |
IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC |
Network Controllers | Intel i350-AM2 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) |
Graphics | ASPEED AST2400 BMC |
Input / Output (per node) |
Serial ATA | 10x SATA3 (6Gbps) ports |
LAN | 2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port |
USB | 2x USB 3.0 ports |
VGA | 1x VGA port |
Management |
Software | SuperDoctor 5 Watch Dog NMI IPMI 2.0 SUM and SSM |
Power Configurations | ACPI / APM Power Management Power-on mode for AC power recovery |
Chassis |
Form Factor | 4U Rackmount |
Model | CSE-F424AS-R1K28BP |
Dimensions and Weight |
Width | 17.63" (448mm) |
Height | 6.96" (177mm) |
Depth | 29" (737mm) |
Package | 28.3" (W) x 15.0" (H) x 42.4" (D) |
Weight | Net Weight: 105 lbs (47.63 kg) Gross Weight: 150 lbs (68.04 kg) |
Available Colors | Black |
Front Panel |
Buttons | Power On/Off button UID button |
LEDs | Power status LED Hard drive activity LED 2x Network activity LEDs Information LED (UID, Fan failure, Overheat) |
Expansion Slots (per node) |
PCI-Express | 1 PCI-E 3.0 x16 (LP) + 1 Micro LP MicroLP Adapter Matrix (Networking options) |
Drive Bays (per node) |
Hot-swap | (6+2) 3.5" Hot-swap SATA3 HDD trays |
Backplane |
1x SAS/SATA backplane |
System Cooling (per node) |
Fans | 2x 8cm 11k RPM middle fans |
Power Supply |
1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 |
AC Input | 1000W Output @ 100-140V, 8-12A, 50-60Hz 1280W Output @ 180-240V, 6-8A, 50-60Hz |
DC Output | 1000W: +12V/83A; +5Vsb/4A 1280W: +12V/106.7A, +5Vsb/4A |
System BIOS |
BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | Plug and Play (PnP) APM 1.2 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 UEFI |
Operating Environment / Compliance |
RoHS
| RoHS Compliant |
Environmental Spec. | Operating Temperature: 5°C to 40°C (41°F to 104°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |